PAS 150 Diesel Silenced Centrifugal Trailer Pump Atlas Copco
The pump system consists of a centrifugal pump and a vacuum pump - making automatic priming possible. Even with suction heights of several meters the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the semi-open impeller, the PAS MF range is also suitable for pumping liquids with solids in suspension.
KEY FEATURES
- Pump High Efficiency 77% BEP
- Rapid "DRY" Priming - Up to a Heigh of 7.5m (24.6ft)
- High Resistance to Abrasive Liquids and Turbid Sandy Waters
- Semi-Open Impeller - Solids Handling up to 76mm (3")
- Diaphragm Vacuum Pump - Oil Free Suitable for Dry Running: No Contamination of the Environment
- Easy Maintenance - Hinged Cover for Direct Access to the Impeller (Without Lifting Devices). Link Belt Quick to Replace on the Field
- Mechanical Shaft Seal in Oil Bath - It Allows the "Dry Running" Operation of the Pump
- Wear Plate - Cast Iron (G11 Rubber Lined) or Stainless Steel Wear Plate, that are Easily Replaceable
PUMP PERFORMANCE CURVE
| Pump Specification Data | |
|---|---|
| Model | PAS 150 |
| Qmax | 111L/S - 400M3/H |
| Hmax | 37m (121ft) |
| Q Max Eff. | 95L/S - 340M3/H |
| Eff. Max | 77% |
| Suction Port | Flanged - 150 TABLE E (AS 2129) |
| Delivery Port | Flanged - 150 TABLE E (AS 2129) |
| Impeller Type | Semi-Open 2 Vane |
| Solids Handling | 76mm (3.0") |
| Pump Material | G11 | F11 |
|---|---|---|
| Casing | EN-GJL-200 Cast Iron | EN-GJL-200 Cast Iron |
| Impeller | EN-GJS-500 Ductile Iron | AISI 316L - CF3M Stainless Steel |
| Wear Plates | EN-GJL-200 Rubber Lined Cast Iron | AISI 316L - CF3M Stainless Steel |
| Number of Plates | 2 | 2 |
| Shaft | 39NiCrMo3 Steel | 39NiCrMo3 Steel |
| Flushing | Yes | Yes |
| Mechanical Seal | Tungsten Carbide / Tungsten Carbide | Tungsten Carbide / Tungsten Carbide |
| Elastomers | NBR/VITON | NBR/VITON |
| Pump Priming System | |
|---|---|
| Vacuum Pump | V20 |
| Vacuum Pump Type | Diaphragm |
| Nominal Air Capacity | 50mM3/H |
| Max Vacuum | 0.9 Bar |
| Separator Type | Atlas Copco |
| Separator Material | EN AC-42100 (AISi7Mg0.3) - Aluminum |
| Drives | Link Belt |
| Pump Engine Specifications | |
|---|---|
| Make | Deutz |
| Model | D 2.9 L4 |
| Type | Diesel Direct Injection Aspirated |
| Displacement | 2900 CM3 / 177IN3 |
| No. Cylinders | 4 |
| Cooling | Liquid with Radiator |
| RPM Type | Variable |
| Standard Speed | 2000RPM |
| US Emissions | EPA Tier 3 |
| Starting | Electric |
| Starting Voltage | 12V |
| Pump Engine Specifications | |
|---|---|
| Make | Deutz |
| Model | D 2.9 L4 |
| Type | Diesel Direct Injection Aspirated |
| Displacement | 2900 CM3 / 177IN3 |
| No. Cylinders | 4 |
| Cooling | Liquid with Radiator |
| RPM Type | Variable |
| Standard Speed | 2000RPM |
| US Emissions | EPA Tier 3 |
| Starting | Electric |
| Starting Voltage | 12V |