WEDA D100 50Hz Submersible Pump Atlas Copco
| Pump Specification Data | WEDA D100 |
|---|---|
| Installation | Portable Drainage pump |
| Discharge connection | 10” std for WEDA D100N, hose or NPT |
| Hydralic range | N - Normal Head |
| Solid handling | Strainer hole dimension 12 mm |
| Liquid Temperature | max 40°C (104°F), standard |
| Depth of immersion | max 20 m (65 feet) |
| Liquid density | 1100 kg/m3 (9.2 lb. per US gal.) |
| pH of the pumped liquid | pH 5–8 |
| Frequency | 50 Hz |
| Insulation class | Class F (+155C), IEC 85 |
| Protection class | IP68 |
| Voltage variation | max ± 5% of nominal voltage |
| Voltage imbalance | max 2% - between phases |
| Max start stop | max 30 - No. of starts/hour |
| Thermal contacts | 140°C (284°F) |
| Cable | Oil and wear resistant rubber cable type HO7RN-F |
| Power cable | 20 m, 2 x 4G25 mm² |
| Signal cable | 21 m, 3G1.5 mm² for thermal switches |
| Outer casing | Galvanized steel |
| Impeller | Cr-alloyed white cast iron, 55±5 HRC |
| Wear parts | Nitrile rubber diffuser center; cast-iron diffuser |
| Stator housing | Aluminum |
| Strainer | Stainless steel |
| Shaft | Stainless steel |
| O-rings | Nitrile rubber |
| Discharge connection | Aluminum |
| Bearings | Upper: Ball bearings with C3 clearance |
| Bearings | Lower: Double ball bearings with C3 clearance |
| Mechanical seal | Instant Service Pack contains below in an oil bath |
| Mechanical seal | Primary seal: Tungsten carbide against silicon carbide |
| Mechanical seal | Secondary seal: Carbon against silicon carbide |
| Quick couplings | - |
| Start type | External Y/D or external DOL starter |
| Accessories | Float switch |
| Accessories | Zinc anodes |
| Accessories | Epoxy coating, Starter box |
| Pump Dimensions | Unit | Normal Head |
|---|---|---|
| Weight | Kg | 510 |
| Height | mm | 1412 |
| Width | mm | 650 |
| Diameter | mm | 600 |
| Pump Power Rating |
|---|
| Rated Power (P2) 54kW |
| Max. Power Input 65kW |
| Motor Data | Rated Current A |
|---|---|
| 400V | 110 |
| 500V | 80 |