WEDA S30 50Hz EN Submersible Pump Atlas Copco
| Pump Dimensions | Unit | Normal Head |
|---|---|---|
| Weight | Kg | 25 |
| Height | mm | 620 |
| Width | mm | 326 |
| Diameter | mm | 250 |
| Pump Specification Data | WEDA S30 |
|---|---|
| Installation | Portable Sludge Pump |
| Discharge Connection | 3" Standard Hose, ISO-G or NPT Thread |
| Hydralic Range | N - Normal Head |
| Solid Handling | Max solid handling size 50mm |
| Liquid Temperature | Max 40°C (104ÆF), standard |
| Depth of Immersion | Max 20m (65ft) |
| Liquid Density | 1100Kg/m3 (9.2lb. Per US Gal.) |
| pH of the pumped liquid | pH 5-8 |
| Frequency | 50Hz |
| Insulation Class | Class F (+155C), IEC 85 |
| Protection Class | IP68 |
| Voltage Variation | max ± 5% of nominal voltage |
| Voltage Imbalance | max 2% - between phases |
| Max Start-Stop | max 30 - No. of starts/hour |
| Thermal Contacts | 140°C (284°F) |
| Cable | Oil and wear resistant rubber cable type |
| Cable | 1 Ph: 20m 3G2.5 mmÇ + plug |
| Cable | 3 Ph: 20m 4G1.5 mmÇ |
| Volute | Rubber Lining |
| Impeller | Cr-alloyed white cast iron, 55±5 HRC |
| Stator housing | Aluminum |
| Shaft | Stainless Steel |
| O-rings | Nitrile Rubber |
| Discharge Connection | Aluminum |
| Bearings | Single row ball bearing with C3 clearance |
| Mechanical seal | Primary seal: Silicon carbide against silicon carbide |
| Mechanical seal | Secondary seal: Lip seal against wear sleeve |
| Mechanical seal | External Plug for Oil Inspection |
| Quick Couplings | 3" BSP female Camlock adaptor/coupling/Storz coupling 75-B |
| Start Type | Built-in capacitor + contactor 1 Ph. Built-in contactor and rotation control for 3 ph |
| Accessories | Float Switch |
| Accessories | Zinc anodes |
| Accessories | Epoxy Coating |
| Voltage | Max Power Input kW | Rated Current A |
|---|---|---|
| 230V / 1Ph | 2.2 | 9.9 |
| 230V / 3Ph | 3.1 | 9.6 |
| 400V / 3Ph | 3.1 | 5.5 |
| 500V / 3Ph | 3.1 | 4.4 |
| 690V / 3Ph | 3.1 | 3 |