MLS6-22 Submersible Slurry Pump Mody
KEY FEATURES
Pump End
pH Range: 5 to 12
Impeller Type: Semi Open
Max. Temperature of Pumped Fluid: 104°F/40ºC
Max. Starts/Stop Per Hour: 15
Max. SubmergenceL: 65 Feet
MOTOR
4-pole induction continuous rated motor with squirrel cage rotor. Automatic ON/OFF/ON Thermal Overloads in Motor. Stator insulation class ‘H’ (180ºC), 1.15 Service Factor.
BALL BEARINGS
The rotor shaft is carried in two ball bearings. Double row contact lower bearing is capable of carrying high thrust and radial loads. Upper bearing is a deep groove single row oversized bearing. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.
POWER CABLE
Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 65ft. (20m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU.
SHAFT SEALS
Double Mechanical Seals, outer and inner are Silicon Carbide, both rotating and stationary faces.
POWER SUPPLY
3 phase, 50 Hz, AC Supply, 400v. Other voltages available upon request.
COOLING
Top discharge ensures that the pump is cooled by the pumped liquid allowing the pump to operate even if not completely submerged.
HYDRAULICS
Multi Vane, Semi-Open Impellers to effectively handle abrasive media
