Automatic Priming Centrifugal Pump CP220i Sykes
The CP220i pump is a reliable and proven pumping solution. With exceptional performance from a compact and robust unit, the CP220i has been designed to provide greater cost efficient fluid handling solutions for all users. This pump has backed the NPE operations throughout Australia on countless projects as an integral component to any turn key construction water package.
With a fully automatic priming pump it can run dry for an extended periods due to the oil bath mechanical seal assembly which allows priming with long suction hoses and suction lifts up to 9 metres. As fluid levels fluctuate, the pump will ‘snore’ until the liquid is available for the pump to fully reprime itself automatically.
KEY FEATURES
- Low fuel usage
- Reduced engine size
- Dry self prime and reprime
- Linear actuator
- Lower maintenance costs
- Exhaust guard/cover
- Turbo heat shield
- Operates in ‘snore’ condition
- Fully automated float system
- Telemetry Avaliable
- Close coupled SAE bearing frame
- Diesel, electric or hydraulic drive
- Solids handling Lower maintenance costs
- Lockable fuel cap
- Lockable battery isolator
PUMP PERFORMANCE CURVE
| Pump Specifications Data | |
|---|---|
| Dimensions (mm) | 2200mm x 1500mm x 2279mm |
| Weight (net) | 2600KG |
| Sound Level | 52 dB (A) at 10m |
| Lifting Point | Fitted with single lifting point |
| Max. Flow | 220L/s |
| Max. Vacuum | 9m |
| Max. Vacuum | 640 kPa (64m) |
| Connections | 200mm |
| Solids Handling | 80mm |
| Impeller Type | 2 vane fully open impellor |
| Priming System | Compressor |
| Canopy | Full Acoustic |
| Engine Specification Data | |
|---|---|
| Manufacturer | Perkins |
| Engine Type | 1104C-44TA |
| Flywheel Power | 97kW |
| Max. Engine Spreed | 2200 RPM |
| Fuel Consumption | 6.67h @ 1400 RPM |
| Fuel Capacity | 440L |
| Displacement | 4.4L |
| Number of Cylinders | 4 |
| Cooling Systems | Air Cooled |