HH160i Diesel Drive Auto Prime High Head Pump Sykes
The Himax Pump is a true self-priming pump so does not require manual priming of the suction line or filling of a priming tank in order to begin its normal operation. The Sykes High Head range of pumpsets are fully automatic priming and designed to meet the stringent demands of the mining, construction and rental industries. Boasting one of the best shaft stiffness ratio’s of any automatic priming pump on the market, the Sykes High Head range provides the reliability to meet market expectations.
In addition the pump can run dry for extended periods due to the mechanical seal assembly which allows priming with long suction hoses and suction lifts of up to 9m (28 feet). As fluid levels fluctuate, the pump will “snore” until the liquid is available for the pump to fully reprime itself automatically.
KEY FEATURES
- Low fuel usage
- Reduced engine sizes
- Lower maintenance costs
- Dry self prime and reprime
- Close coupled SAE Bearing Frames
- Suction lifts to 9m
- Operates in ‘snore’ conditions
- Vacuum Priming option available for ground dewatering
- Diesel, electric or hydraulic drive
- Solids handling
- Simple maintenance
- Replaceable wear parts
- Chassis - skid, road tow, wheeled, caged
- Powered by Perkins or Cat Engines
- Other engines available on request
- Sykes purpose built Control panel
PUMP PERFORMANCE CURVE
| MATERIALS OF CONSTRUCTION | |
|---|---|
| Pumping Casing | S.G. IRON 400/12 |
| Suction Cover | S.G. IRON 400/12 |
| Air Separation Tank | S.G. IRON 400/12 |
| Bearing Bracket | S.G. IRON 400/12 |
| Pump Shaft | 431 Stainless Steel |
| Impellar | 316 Stainless Steel |
| Wearplates | 316 Stainless Steel |
| Mechanical Seal | Silicon Carbide, Cartridge Seal c/w, Pumping Ring & Glycol, Quench |
| N.R.V. (Ball Type) | S.G. IRON 400/12 |
| DESIGN DETAILS | |
|---|---|
| Single Stage, end suction type, 2 vane semi open impellar, centrifugal pump | |
| Suction Flange (mm/in) | 200/8 |
| Delivery Flange (mm/in) | 150/6 |
| Solids Handling Size (mm/ in) | 65/2.5 |
| Speed (RPM) | Power Usage (kW) | Fuel Rate (L/HR) | Run Time (hrs - 1200L Fuel Tank) |
|---|---|---|---|
| 1400 | 70 | 17.29 | 69 |
| 1800 | 125 | 30.88 | 39 |
| 2000 | 165 | 40.76 | 39 |
| Calculations are based on 210g/kw.hr | Calculations are based on 210g/kw.hr | Calculations are based on 210g/kw.hr | Calculations are based on 210g/kw.hr |