330kVA Diesel Generator
This generator set is designed in facilities certified to ISO9001 and manufactured in facilities certified to ISO9001 or ISO9002. This Cummins® Power Generation commercial generator set is a fully integrated power generation system, providing optimum performance, reliability, and versatility for stationary standby, prime power, and continuous duty applications.
KEY FEATURES
- Cummins® Heavy-Duty Engine - Rugged 4-cycle industrial diesel delivers reliable power, low emissions and fast response to load changes
- Permanent Magnet Generator (PMG) - Offers enhanced motor starting and fault clearing short circuit capability
- Alternator - Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings; low waveform distortion with non-linear loads, fault clearing short circuits capability, and class H insulation
- Control System - Standard PowerCommand® electronic control provides total system integration including remote start/stop, precise frequency and voltage regulation, alarm and status message display, output metering and auto-shutdown
- Cooling System - Standard integral set-mounted radiator system, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat
- Enclosures - Optional weather-protective and sound attenuated enclosures are available
- Warranty and Service - Backed by a comprehensive warranty and worldwide distributor network
| GENERATOR SPECIFICATIONS | ||
|---|---|---|
| SPECIFICATIONS | STANDBY | PRIME |
| Ratings | 264kW (330kVA) | 240kW (300kVA) |
| Governor Regulation Class | ISO8528 | - |
| Voltage Regulation, No Load to Full Load | ± 1% | - |
| Random Voltage Variation | ± 1% | - |
| Frequency Regulation | Isochronous | - |
| Random Frequency Variation | ± 0.5% | - |
| Radio Frequency Emissions Compliance | In compliance with BS 800 and | - |
| ENGINE SPECIFICATIONS | |
|---|---|
| Design | 4 cycle, in-line, Turbo Charged, Air-cooled |
| Bore | 114 mm (4.5in) |
| Stroke | 145 mm (5.7in) |
| Displacement | 8.8 liter (543 in3) |
| Cylinder Block | Cast iron, 6 cylinder |
| Battery Capacity | 100A/hr |
| Battery Charging Alternator 70 amps | 70 amps |
| Starting Voltage | 24 volt, negative ground |
| Fuel System | Direct injection |
| Fuel Filter | Spin on fuel filters with water separator |
| Air Cleaner Type | Dry replaceable element |
| Lube Oil Filter Type(s) | Spin on full flow filter |
| Standard Cooling System | 122°F (50° |
| OUTPUT |
|---|
| Prime 330kVA |