WEDA D40 50Hz Submersible Pump Atlas Copco

FLOW RATE
28L/S

Max Head (m)
25

Solid Handling (mm)
7

The Atlas Copco WEDA D40 (50 Hz) drainage pumps handle either clean or sand-laden water, even with small solid particles, with the best performance and efficiency. These pumps are particularly suitable for general dewatering applications, ground water, raw water, construction sites and harsh conditions on site.

Pump Specifications Data
InstallationPortable Drainage pump
Discharge Connection3” std, 4” opt, hose, ISO-G or NPT thread
Hydralic RangeN - Normal Head
Solid HandlingStrainer hole dimension 7 mm
Liquid Temperaturemax 40°C (104°F), standard
Depth of Immersionmax 20 m (65 feet)
Liquid Density1100 kg/m3 (9.2 lb. per US gal.)
pH of the Pumped LiquidpH 5–8
Frequency50 Hz
Insulation ClassClass F (+155C), IEC 85
Protection ClassIP68
Voltage Variationmax ± 5% of nominal voltage
Voltage Imbalancemax 2% - between phases
Max Start Stopmax 30 - No. of starts/hour
Thermal Contacts140°C (284°F)
CableOil and wear resistant rubber cable type HO7RN-F
Cable3 Ph: 20m 4G1.5 mm²
Outer CasingAluminium
ImpellerCr-alloyed white cast iron, 55±5 HRC
Wear PartsNitrile rubber
Stator HousingAluminum
StrainerHard Sole - Reinforced Polyethylene
ShaftStainless steel
O-ringsNitrile rubber
Discharge ConnectionAluminum
BearingsDouble-row ball bearing with C3 clearance
Mechanical SealPrimary seal: Silicon carbide against silicon carbide
Mechanical SealSecondary seal: Lip seal against wear sleeve
Mechanical SealExternal Plug for Oil Inspection
Quick Couplings3" BSP female Camlock adaptor/coupling/Storz coupling 75-B
Quick Couplings4" BSP female Storz coupling
Start TypeBuilt-in contactor with rotation control
AccessoriesFloat switch
AccessoriesZinc anodes
AccessoriesEpoxy coating
Pump Dimensions Unit Normal Head
Weight (Excl. Cable)Kg25
Heightmm525
Widthmm290
Diametermm290

Request Availability

Request Availability

First