The SPP AUTOPRIME QHH80 pump is designed for high head and modest flow applications including jetting, washing and in mines and quarries where a high lift is required. Solids handling is limited by the use of a high performance design for the impeller.
KEY FEATURES
- Bunded unit on optional two-wheel road trailer or skid
- 12 volt battery starting by key switch
- Pump will pass solids up to 20mm diameter
- Reliable double mechanical seals which allow dry running
- Pump can be left running when liquid is exhausted and will prime automatically when liquid is present
- Rugged construction requires minimal operator maintenance
- 65 cfm vacuum pump with coalescer to filter exhaust air before emission into the atmosphere.
TECHNICAL SPECIFICATIONS
Flow Rate | 33L/S Maximum |
Discharge Head | 89m Maximum |
Working Pressure | 10 Bar Maximum |
Hose Size | 80mm (3in) Diameter |
Max Solids Size | 20mm Diameter |
Pump Speed Range | 1500RPM to 2400RPM |
Pump Casing | Cast Iron |
Impeller | Stainless Steel |
Pump Shaft | Stainless Steel |
Wear Plates | SG Iron |
Suction Sump | Cast Iron |
Shaft Seal | Silicon Carbide / Silicon Carbide |
Elastomer | Viton |
Diesel Engine | Perkins 404D |
Starting | 12 Volt Battery by Key Switch |
Fuel Tank Capacity | 220 Litres |
Full Load Consumption | 6.5 Litres Per Hour Average |
Full Load Running Time | 34 Hours |
Chassis Options | Skid Mounted or Pod for Mounting |
Approximate Wet Weight | 1500kg on Trailer |