Extremely efficient and packed with user benefits, the PT pumps are capable of operating for very long periods of time on a small amount of fuel. Plus, the pumps provide high air handling necessary on the toughest well point and sock applications.
The pump and motor are enclosed in the robust galvanized stackable frame, which protects the pump unit on working site. During transport the frames can be loaded 2 piece above each other. The PT series are self-priming, positive displacement piston pumps.
Pump Specification Data | |
---|---|
Type | Double Acting |
Flow Max | 90m3/h |
Head Max | 20m |
Suction Lift Max | 9.2m |
Cylinder Size | 175mm |
Req. Power | 6.0kW |
Pump Speed | 62 Strokes/Min |
Suction Side | 6" V-Part Incl. Stone Catcher |
Discharge Side | 6" V-Part |
Pump Material Specification | |
---|---|
Pump Casing | Cast Iron |
Cylinder Liner | Stainless Steel AISI316 |
Piston Cup | Leather |
Piston Rod | Stainless Steel AISI316 |
Shaft Seal | Gland Packaging |
O Rings | NBR |
Electric Drive | |
---|---|
Motor Power | 7.5kW |
Voltage | 400/690 Volt |
Speed | 1480RPM - 4-Pole |
Motor Execution | IM 1001, IP55 ISO F |
Start | Start Delta switch with thermic protection |
Assembly | Galvanized base frame with central lifting hook and protection cover over the electric motor |
Noise Level | 55 dBa at 10m |